Penico Mould Reamer for Bottom Plate Fitting

The Penico Mould Reamers are an essential tool for the mould repair operation. This tool changes an expensive & difficult machining operation (often involving expensive skilled staff) into a bench fitting operation.

There is a full range of reamers available. The reamers are supplied in two materials, High Speed Steel (HSS) & Carbide Tipped (TC). The HSS reamers are suitable for cast iron moulds whilst the TC reamers are for both cast iron & bronze moulds.

A driving wrench for the reamer is available. Special sizes can be manufactured on request.

Quality Guaranteed

Gauge calibration to ISO 9001:2015 internation standards to maintain the highest standards of gauging accuracy.

Blowmould Reamers (Dovetail Height 9.53 /9.56)
Size Pinch Diameter Tool Number
2" 34.98 / 35.02 MR-PG-1
2 ¾” 54.03 / 54.08 MR-PG-2
3” 60.38 / 60.43 MR-PG-3
3 ½” 73.08 / 73.13 MR-PG-4
4” 85.78 / 85.83 MR-PG-5
4 ½” 98.48 / 98.53 MR-PG-6
5” 111.18 / 111.23 MR-PG-7
6” 136.58 / 136.63 MR-PG-8
7” 161.98 / 162.03 MR-PG-9