Penico Fitter Gauges

The Penico Fitter Gauge is used to inspect the blankmould dovetail profile cut-out. It inspects only the dovetail profile. This gauge is provided as a Go or a No Go gauge.

Please specify which gauge is required. This gauge inspects the full dovetail profile of the blankmould cut-out.

It will detect any out of roundness that other gauges cannot inspect.

Please note that sizes other than those in the chart available.

Quality Guaranteed

Gauge calibration to ISO 9001:2015 internation standards to maintain the highest standards of gauging accuracy.

Blankmould Dovetail Fitter Gauge (Dovetail Height Go 8.74 / No Go 8.76)
Size	Pinch Diameter	Gauge Number
2 1/8"	40.41 / 40.44	FG-PG-01
2 ½”	49.93 / 49.96	FG-PG-02
2 ¾”	56.28 / 56.31	FG-PG-03
3”	62.63 / 62.66	FG-PG-11
3 ½”	75.33 / 75.36	FG-PG-04
4”	88.03 / 88.06	FG-PG-05
4 ¼”	94.38 / 94.41	FG-PG-12
4 ½”	100.73 / 100.76	FG-PG-06
5”	113.43 / 113.46	FG-PG-07
5 ¼”	119.78 / 119.81	FG-PG-08
5 5/8”	129.31 / 129.34	FG-PG-09
6 ¼”	145.18 / 145.21	FG-PG-10

PENICO GAUGES GALLERY

Useful Links

+44 (0) 1274 511 044
+44 (0) 1274 510 770
info@penico.com

Address

Albion Works, Keighley Road
Bingley, West Yorkshire,
BD16 2RD, UK