Penico Blank Reamer for Neckring Fitting

The Penico Blankmould Reamers are an essential tool for the mould repair operation. This tool changes an expensive & difficult machining operation (often involving expensive skilled staff) into a bench fitting operation.

There is a full range of reamers available. The reamers are supplied in two materials, High Speed Steel (HSS) & Carbide Tipped (TC). The HSS reamers are suitable for cast iron moulds whilst the TC reamers are for both cast iron & bronze moulds. A driving wrench for the reamer is available.
Special sizes can be manufactured on request.

Quality Guaranteed

Gauge calibration to ISO 9001:2015 internation standards to maintain the highest standards of gauging accuracy.

Blankmould Reamers (Dovetail Height 8.76 / 8.74)
Size Pinch Diameter Reamer Number
2 1/8" 40.41 / 40.44 BR-PG-1
2 ½” 49.93 / 49.96 BR-PG-2
2 ¾” 56.28 / 56.31 BR-PG-3
3” 62.63 / 62.66 BR-PG-4
3 ½” 75.33 / 75.36 BR-PG-5
4” 88.03 / 88.06 BR-PG-6
4 ¼” 94.38 / 94.41 BR-PG-7
4 ½” 100.73 / 100.76 BR-PG-8
5” 113.43 / 113.46 BR-PG-9
5 ¼” 119.78 / 119.81 BR-PG-10
5 5/8” 129.31 / 129.34 BR-PG-11
6 ¼” 145.18 / 145.21 BR-PG-12