Penico Blank Mould Dovetail Flush Pin Profile Gauge

This Gauge is used to inspect the dovetail profile only. It consists of a fixed & movable Anvil. It is held in the dovetail by spring tension.

The end of the Gauge has two steps. When the moving Anvil end falls between the two steps the dovetail is within the tolerance of the dovetail profile.

This Gauge is essential for the manufacture of the Neckring cut-out

This gauge can be provided with carbide tips to give extended calibration periods.

Quality Guaranteed

Gauge calibration to ISO 9001:2015 internation standards to maintain the highest standards of gauging accuracy.

Blankmould Dovetail Flushpin Gauge (Dovetail Height 8.76 / 8.74)
Size Pinch Diameter Gauge Number
2 1/8” 40.41 / 40.44 191-PG-37
2 ½” 49.93 / 49.96 191-PG-38
2 ¾” 56.28 / 56.31 191-PG-102
3” 62.63 / 62.66 191-PG-143
3 ½” 75.33 / 75.36 191-PG-39
4” 88.03 / 88.06 191-PG-95
4 ¼” 94.38 / 94.41 191-PG-139
4 ½” 100.73 / 100.76 191-PG-40
5” 113.43 / 113.46 191-PG-41
5 ¼” 119.78 / 119.81 191-PG-172
5 5/8” 129.31 / 129.34 191-PG-42
6 ¼” 145.18 / 145.21 191-PG-43