Prepare for mould repair
If there is one thing we have a great reputation for, it is supplying a high quality mould reamer. The reamers are useful for a variety of mechanical operations. People use them most often to smooth and also debur edges in moulds. As for our models, they are a vital piece of equipment for mould repair projects.
Mould repair is something you cannot do without preparing for it correctly. If you try to, the end result will not be as good as it could be. You could also cause more harm than good. To avoid this, there are many things to think about.
Why are you welding?
As many of you will know, welding is a vital part of mould maintenance. Something a welder has to comprehend is what the mould maker needs. Everyone requires something different to get their gear running again quickly. In addition, the welder must keep in mind everything the mould maker does not want.
Where are you welding?
A repair's location is essential to its success. The welder needs to know whether their equipment can access the area that needs welding successfully. To figure this out, the welder should place their piece on the work table. Then, they can carry out a simulation weld to assess the ease of access.
In addition to these questions, you must ask for feedback. Not to mention, the welder has to know what kind of welding they need to do. They need the reasons for the request too. There are numerous processes out there, each with their own pros and cons. It is vital to choose the right one so that it does not cause any harm to the mould.
Come to us for a mould reamer
At Penico Gauges, we make certain that every product we offer meets the expectations of our customers. With one of our tools, it is easy to repair faults in a comprehensive manner. We have options to suit various needs and also create bespoke gauges on request.
If you would like to know more about why you should choose our mould reamer products, feel free to contact us. We can give you lots of advice and then ensure you choose the perfect tools.
View All Blogs
- Permanent surfacing or coating may be preferable to thermal surfacing
- The other steps involved in blown glass production
- Prepare for mould repair
- A two-phase forming process
- Interior and exterior threads
- Remain aware of mould contamination
- Containers you can make using Blow and Blow
- The containers you can make with press and blow
- Gravity permanent mould casting
- Exiting the lehr