homeAbout UsExport/DeliveryProductsObjectivesLinksContactLocation

Penico Blowmould Dovetail Flush Pin Profile Gauge

This Gauge is used to inspect the dovetail profile only. It consists of a fixed & movable Anvil. It is held in the dovetail by spring tension. The end of the gauge has two steps. When the moving Anvil end falls between the two steps the dovetail is within the tolerance of the dovetail profile. This gauge can be provided with carbide tips to give extended calibration periods.
The gauge is also available with a digital indicator to improve still further the measurement of the dovetail profile.

Please note that sizes other than those in the chart available

View PDF here.
 
 
 
Blowmould Dovetail Flushpin Gauges
Dovetail Height 9.53 /9.56
Size Pinch Diameter Gauge Number
2” 34.98 / 35.02 191-PG-44
2 ¾” 54.03 / 54.08 191-PG-103
3” 60.38 / 60.43 191-PG-45
3 ½” 73.08 / 73.13 191-PG-119
4” 85.78 / 85.83 191-PG-46
4 ½” 98.48 / 98.53 191-PG-176
5” 111.18 / 111.23 191-PG-47
6” 136.58 / 136.63 191-PG-48
7” 161.98 / 162.03 191-PG-86


 
Quality Guaranteed
Gauge calibration to ISO 9001:2000 international standards to maintain the highest standards of gauging accuracy.

 
Penico Gauges Limited  ·  Albion Works  ·  Keighley Road  ·  Bingley  ·  West Yorkshire  ·  BD16 2RD, UK  ·     Telephone: +44 (0) 1274 511 044		  
 
Homepage      |      About Us      |      Export/Delivery      |      Products      |      Objectives      |      Agents      |      Contact Us      |      Location