homeAbout UsExport/DeliveryProductsObjectivesLinksContactLocation

Penico Bottom Plate Dovetail Profile Gauges

The Bottomplate Dovetail Profile Gauge is used to inspect the dovetail profile of the neckring. The gauge has a Go & a No Go profile. The dovetail is correct when only the Go side passes over the dovetail profile.
The gauge is available with carbide faces for extended operational life.Please note that sizes other than those in the chart available
 
 
I S Bottomplate Dovetail Profile Gauges
Dovetail Height 9.63 /9.68
Size Pinch Diameter Gauge Number
2” 34.92 / 34.95 191-PG-204
2 ¾” 53.97 / 54.00 191-PG-205
3” 60.32 / 60.35 191-PG-206
3 ½” 73.02 / 73.05 191-PG-207
4” 85.72 / 85.75 191-PG-208
4 ½” 98.42 / 98.45 191-PG-209
5” 111.12 / 111.15 191-PG-210
6” 136.52 / 136.55 191-PG-211
7” 161.92 / 161.95 191.PG-212


 
Quality Guaranteed
Gauge calibration to ISO 9001:2000 international standards to maintain the highest standards of gauging accuracy.

 
Penico Gauges Limited  ·  Albion Works  ·  Keighley Road  ·  Bingley  ·  West Yorkshire  ·  BD16 2RD, UK  ·     Telephone: +44 (0) 1274 511 044		  
 
Homepage      |      About Us      |      Export/Delivery      |      Products      |      Objectives      |      Agents      |      Contact Us      |      Location
  
t.html">Export/Delivery      |      Products      |      Objectives      |      Agents      |      Contact Us      |      Location